PLX SM-AFR Wideband

Here are some pictures of the PLX SM-AFR Wideband hat I purchased and installed recently.

For the power wire, I had previously created a power wire that connects to the power wire to the radio, and so I connected the power for the wideband from this source.

I connected the wideband output to the EGR connection according to this thread on LS1Tech.

I placed the control unit in the kick panel on the passenger side.

I purchased a wideband bung on eBay, and had it welded into the exhaust pipe right after the y-pipe.

I routed the sensor wires through a grommet on the passenger floorboard.

Return to the main page