B&M Transmission Cooler

Here are some pictures of the B&M transmission cooler hat I purchased recently. I chose to mount it on the passenger side in front of the AC condenser. I used one existing mounting hole for the top mount and drilled another one into the top part of the frame just below the lower part of the airbox. I used two of the flat brackets that were included with the cooler and connected the bottom of the cooler to the lower part of the frame. I routed the lines by disconnecting the hose clamp on the transmission fluid return line from the radiator, and routing that line to the cooler. I routed the other end of the transmission cooler back to the transmission fluid return line.

Return to the main page