SPI Motorsports Electric Fuel Pressure Gauge

Update (8/24/05)

I finally finished installing the fuel pressure gauge. I purchased a -6AN x -6AN x 1/8 FNPT fitting to connect the fuel pressure gauge to the fuel system. I currently have the stock fuel pressure regulator and return lines, so I had to connect the fuel pressure sender to the fuel supply line. I initially tried to directly connect the fuel pressure sender directly into the AN adapter, however it was just barely too tall, and did not allow the hood to fully close. So I purchased a galvanized 1/8" street elbow, and used it to connect the AN adapter to the fuel pressure sender. That configuration allowed enough clearance for the hood to close.

---